EZ Dumper 6.5' Stainless Steel Truck Bed Dump Insert

The EZ-Dumper Dump Insert is the perfect solution for landscapers, general contractors and handy homeowners. It bolts directly to most full-size pickup trucks in about two hours with few or no alterations. It dumps and lowers using a 12V Monarch Hydraulic Double-Acting Pump that is connected directly to your truck's battery. It is also available in a 6' model that fits most short bed trucks and has a payload capacity of 1.5 cubic yards!

Easy to Install and Operate

All you need are a few common tools. No alterations are needed for most trucks. Simply slide the EZ-Dumper into your truck bed, secure it with bolts in the holes already on your truck, and you're ready to go. To empty a payload, just open the tailgate and push the button on your remote. The EZ-Dumper lifts to an angle of 51 degrees in about 15 seconds for quick and clean unloading.

Features - 6,000lb Lift Capacity- 12 Gauge Floor

• 14 Gauge Sides
• Expansion Stake Pockets (outside)
• Flat Bar Rub Rails
• Natural Stainless Steel Finish
• Turn Your Pickup into a Dump Truck in About 2 Hours without the Overhead Expense
• Removable, Double-acting Tailgate Lets You Dump, Then Spread What You Dump
• Backed by the Best Warranty in the Industry: Two Years of Front-to-Tailgate, Parts and Labor
• Fits Most Full Size Trucks
• Perfect for Landscapers, General Contractors and Handy Homeowners
• Specifications

| Insert Type | EZ0012TSS-SB 6 Dump Insert| | Bed Length | 74-1/8| | Unloaded Weight | 690 lb| | Payload Capacity | 6000 lb| | Volume Capacity | 1.5 Cubic Yards| | Dump Angle | 51 Degrees| | Frame Construction | Structural Stainless Steel Angle (Top Frame)| | Side Steel | 14 Gauge| | Deck Steel | 12 Gauge| | Tailgate | Double-Acting Removable Spreader| | Energy Source | Truck Battery| | Power Unit | Double Acting Monarch Pump| | Cylinder(s) | Mounted Under Unit| | Hydraulics | Power Up/Power Down| | Remote Control | Standard| | Tie-down Features | Full Length Flat Bar Rub Rails| | Expansion Features | 6 Stake Pockets (outside)| | Lubrication | Thread in Grease Fittings on Pivots| | Installation | Four Bolt-Down Clamps| | Standard Color | 304 Stainless Steel (Unfinished)| | Warranty | 2 Years Front to Tailgate|

Available Options - Stainless Steel Cab Protector- Tarp Kit

• 20 High Stainless Steel Side and Tailgate Extensions
• 12 High Stainless Steel Side Extension Bracket Kit (holds 2--12 board)
• 19 High Stainless Steel Side Extension Bracket Kit (holds 2--12 board)
• Coal Chute Spreader Tailgate